Godrej front load washing machine error codes

Problem

Door open or not closed properly

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Close the door properly.

Problem

Door opened during program operation

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Close the door properly and restart the machine.
• If the error persists, call a service technician.

Problem

Door not unlocking at end of cycle

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Restart the machine and check.
• If the error persists, call a service technician.

Problem

No water supply or low water pressure

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Check the water supply, water pressure, and inlet filter for blockage.

Problem

Drain path clogged, drain pump fault, or blocked filter

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Restart the machine and check.
• If the error persists, call a service technician.

Problem

Water level sensor fault

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Restart the machine.
• If the error persists, call a service technician.

Problem

Maximum temperature reached

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Restart the machine.
• If the error persists, call a service technician.

Problem

Temperature probe fault

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Shown at end of cycle.
• Restart the machine.
• If the error persists, call a service technician.

Problem

Water not heating

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Shown at end of cycle.
• Restart the machine.
• If the error persists, call a service technician.

Problem

Input supply voltage is low

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• The machine continues once voltage recovers above about 160 volts.

Problem

Input voltage is high

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• The machine continues once voltage recovers below about 270 volts.

Problem

Water overflow

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Restart the machine and check.
• If the error persists, call a service technician.

Problem

Load unbalance during spin

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Shown at end of cycle.
• Restart the machine.
• If the error persists, call a service technician.

Problem

Motor-related errors

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Restart the machine and check.
• If the error persists, call a service technician.

Problem

Turbidity sensing calibration required

Causes

The control system is reporting this fault. Use the checks below to narrow down wiring, sensors, supply, or mechanical issues.

Fix

• Shown at end of cycle.
• Call a service technician.